Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1555)

1508 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
IP real-time performance monitoring
43
5. The Real Time Graphs/Tables dialog box displays.
Adding measures to products
To add measures to products, complete the following steps.
1. Right-click a device and select Performance > Real Time Graph/Table.
The Real Time Graphs/Tables dialog box displays.
2. Select Products from the Show list.
The available products display in a list.
3. Select a product in the list and click Measures.
The Select measures - Real Time Graphs/Tables dialog box displays.
4. Select Device Measures from the Show list.
5. To add a MIB measure to the product, complete the following steps.
a. Click MIBS tab in the Available Measures area.
b. Select the MIB measure you want to add to the product.
Select multiple measures by holding down the CTRL key and clicking more than one
measure.
You can also search (refer to “Search” on page 392) for a MIB in the list.
c. Click the right arrow button to move them to the Selected Measures list.
6. To add an expression to the product, complete the following steps.
a. Click the Expressions tab in the Available Measures area.
b. Select the expression you want to add to the product.
Select multiple expressions by holding down the CTRL key and clicking more than one
expression.
To add an expression to the list, refer to “Adding, editing, or duplicating a user-defined
expression” on page 1527.
c. Click the right arrow button to move them to the Selected Measures list.
7. If you want to launch the Expressions dialog box, click the Expressions button.
8. Click OK.
The Real Time Graphs/Tables dialog box displays.
Removing measures from products
To remove measures from products, complete the following steps.
1. Right-click a device and select Performance > Real Time Graph/Table.
The Real Time Graphs/Tables dialog box displays.
2. Select Products from the Show list.
The available products display in a list.