Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 2017)

Brocade Network Advisor SAN + IP User Manual 1977
53-1002949-01
IP device properties
E
Field/Component Description
Properties tab Select to display information about the device.
Detailed Report button Click to launch the detailed product report.
Name The name of the product.
Alias The alias.
Host Name The host name.
System Name The system name.
IP Address The IP address (IPv4 or IPv6 format) of the product.
System OID The system's object identifier.
Product Type The type of device.
VCS Mode Whether or not the device is in VCS mode.
VCS ID The VCS ID number for the fabric.
Note Count The number of nodes in the fabric.
Principal Switch The identifier of the principal switch.
Config Mode The configuration mode.
Device Type The type of device.
Serial # The serial number of the product.
Status The status for the product and the port.
Admin Status The admin status of the product. Options include:
Normal mode
Troubleshooting mode
Memo Additional information about the product.
Vendor The name of the product’s vendor.
Model The model number of the product.
Port Count The number of ports on the product.
Firmware The firmware version of the product.
Build Label The firmware build number.
FDMI Serial Number The serial number of the FDMI.
FDMI Firmware The FDMI firmware version and build number.
FDMI Driver version The FDMI driver version.
FDMI Manufacturer The manufacturer of the FDMI.
Location The physical location of the product.
Contact The name of the person or group you should contact about the product.
Description The description of the product.
Connected AP count Number of APs connected to the controller or switch.
Managed AP count Only applicable to the selected controller. Number of APs that the
selected controller manages.
Controller cluster mode Only applicable to the selected controller. Cluster mode of the controller:
Active, Standby and None.