Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1642)

1596 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Monitoring Flows
44
Flows panel right-click menus
Right-click a sub-flow in the Flows panel of the Flow Vision dialog box to select the following
options:
• Locate - displays the following sub options. Select an option to highlight the port or device in
the topology map:
- Ingress Port - Highlights the ingress port.
- Egress Port - Highlights the egress port.
- Source Device - Highlights the source device.
- Destination Device - Highlights the destination device.
• Table - displays options to control table functions in the panel, such as copy port, row, and
table; export row, export table, print, and select columns.
Flow Vision dialog box overview
This section describes details on information displayed in the Flow Definitions and Flows panels.
Flow Definitions panel
The Flow Definitions panel displays details of all options currently configured for active and inactive
flow definitions in the selected fabric.
FIGURE 700 Flow Vision dialog box (Flow Definitions panel)
Table 148 describes information displayed in the Flow Definitions panel.
TABLE 148 Flows Definitions panel information
Column information Displayed
Violation AMS violation for the flow over the time duration selected.
Target Switch The switch where the flow definition is created.
Name Name provided for flow when created.
Monitor
Mirror
Generator Displays one of the following:
•
Active - The flow is defined and the feature is active,
•
Blank grey cell - Flow is not defined.
•
Inactive - Flow is defined, but the feature is not active.