Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1831)

1790 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
MAPS interoperability with other features
50
Switch Resources TEMP — Temperature sensor N/A 1002
1003
1004
FLASH_USAGE — Flash usage % 1402
CPU — CPU usage % 1404
MEMORY_USAGE — Memory usage % 1404
1406
FCIP CIR_STATE — FCIP circuit state changes Count 3020
CIR_UTIL — FCIP circuit utilization % 3012
CIR_PKTLOSS — FCIP packet loss % 3016
Traffic Performance RX — Receive bandwidth usage percentage % 1186
TX — Transmit bandwidth usage percentage % 1190
UTIL — Trunk utilization % 1206
TX_FCNT — Tx Frame Count Count N/A
RX_FCNT — Rx Frame Count Count N/A
TX_THPUT — Tx Throughput Count N/A
CRED_ZERO — Time Tx credit zero Million N/A
RX_THPUT — Rx Throughput Count N/A
IO_RD — IO Read Command Count Count N/A
IO_WR — IO Write Command Count Count N/A
IO_RD_BYTES — IO Read Data mbps N/A
IO_WR__BY_TES — IO Write Data mbps N/A
1. Only valid for 16 Gbps, 10 Gbps, and QSFP transceivers.
2. Unit label does not display. You can set the value option from a list (such as, IN_RANGE and OUT_OF_RANGE
for temperature measures or FRU states for FRU measures).
TABLE 171 Fabric Watch supported RAS event IDs (Continued)
Category Measure Unit label RAS event ID