Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 201
134
Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Host discovery
4
FIGURE 51
Add Host Adapters dialog box
3. Enter a discovery request name (such as, MyFabric) in the Discovery Request Name field.
4. Click Import.
The Open dialog box displays.
5. Browse to the CSV file location.
The CSV file must meet the following requirements:
•
Comma separated IP address or host names
•
No commas within the values
•
No escaping supported
For example, XX.XX.XXX.XXX, XX.XX.X.XXX, computername.company.com
6. Click Open.
The CSV file is imported to the Add Host Adapters dialog box. During import, duplicate values
are automatically dropped. When import is complete, the imported values display in the Host
List. If the file cannot be imported, an error displays.
7. Verify the imported values in the Host List.
8. Configure Host credentials by choosing one of the following options:
•
To configure HCM agent credentials, select the HCM agent option. Go to
•
To configure CIM server credentials, select the CIM server (ESXi only) option. Continue with
If you do not need to configure Host credentials, skip to
.
9. Configure discovery authentication by choosing one of the following options:
•
To configure discovery with authentication, select the HTTPS from the Protocol list.
•
To configure discovery without authentication, select the HTTP from the Protocol list.