Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1286)

Brocade Network Advisor SAN + IP User Manual 1235
53-1002949-01
Configuration snapshots
32
• Delete button — Select one or more snapshots from the Configuration Snapshots list and
click to manually delete the snapshots from the repository of the management server.
• Report button — Click to launch the Configuration Snapshot Report dialog box. Refer to
“Generating a configuration snapshot report” on page 1236 for more information.
Comparing configuration snapshots
The Comparison dialog box allows you to display the contents of two configurations side-by-side. To
compare two configuration snapshots, perform the following steps.
1. Click the IP tab.
2. Select Configure > Configuration > Configuration Repository.
3. Click the Configuration Snapshots tab.
4. Select one or more products to view the snapshots.
5. Select two snapshots and click Compare.
The Compare dialog box displays, as shown in Figure 530 .
FIGURE 530 Compare dialog box
The Compare dialog box displays the following information:
• Product — The IP address of the device.
• Date — The Displays the date the device configuration was taken.