Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1565)

1518 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
IP historical performance monitoring
43
• Threshold and Rearm settings - Threshold and Rearm page
You cannot modify the following attributes:
• Name - Collector Basics page
• Device or port level - Collector Basics page
• Polling interval - Collector Basics page
• Schedule setting - Collector Basics page
• MIB selection - MIB Object page
• Expression selection - Expression page
• MIB index - MIB Index page
NOTE
The MIB index page for system collectors will not show since you cannot configure the MIB
index for system collectors.
Displaying historical data collectors
Select Monitor > Performance > Historical Data Collectors to display configured historical data
collectors.
FIGURE 655 Historical Data Collectors dialog box
All configured data collectors are listed, showing the following information:
• Name - The name of the data collector.
• Enabled - Whether or not the data collector is enabled (Yes) or disabled (No).
• Polling Interval - The time interval, in minutes, between attempts to contact the information
source and gather data.
• Collectibles Type - At what level the data will be collected and the types of MIB objects used:
- Product Level - SNMP data is collected at the product (device) level.
- Port Level - SNMP data is collected at the port level.