Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 2224)

Brocade Network Advisor SAN + IP User Manual 2187
53-1002949-01
Database tables and fields
I
LATENCY_DETECT_SUPPOR
TED Whether the port supports latency detection. 1
means true and 0 means false smallint
PREVIOUS_STATE Fields copies the old state of the port . The field could
be used to track the state change information for the
switch port . SwitchAssetCollector sets this field
during the collection time. SMIA requested this
information but could be used by any module which
needs to track the state change. varchar 64
EPORT_DISABLED Represents the eportDisabled field from switch.html.
Values populated by SwitchAssetcollector during the
collection time. Possible values includes 0 and 1.
Default value is -1. smallint
SPEED_NEGOTIATED This column indicates if the port speed is negotiated
or not. If port speed is negotiated then value is 1 else
it will be 0.
Default value is -1. smallint
MAX_FRAME_MONITOR Maximum frame monitor supported for switch port. int
MAX_FRAME_MONITOR_OF
FSET Maximum offset supported in fame monitor for
switch port. int
v Contains the features supported as a bit mask at
port level. int
IDENTIFIER Switch port identifier extracted from interface name char 80
PORT_CAPABILITIES 'List of capabilities of this port specified as bit mask.
Each bit would represent capability like FEC,
Encryption and compression, NPIV etc.'; int
XISL_PORT_LIST This field is applicable only for logical ports created
for LISLs. It denotes the list of XISL ports associated
with the current logical port. Will be blank for
non-logical ports. varchar 256
PORT_COMMISSION_STATE Indicates whether port decommission/recommission
was in progress or completed, based on this status
we will show the decommission/recommission icon
on ports and Indicates the
Decommissioned/Recommissioned status of the
ports which was performed from the Management
application.
None - 0, Decommission In Progress - 1 ,
Decommissioned - 2,
Recommission In Progress - 3, Recommissioned - 4.
If the decommission is performed through CLI or
other Management application server then the state
would be None (0).
int
FEATURES_ENABLED Holds as a bit mask the features that are enabled .
Refer FEATURES_ACTIVE for the active/inactive
status of a feature. Each bit would represent features
like Encryption, compression etc.' The bit mask and
their corresponding Features are defined as an enum
in the domain model class - SwitchPort.java. int
TABLE 418 SWITCH_PORT (Continued)
Field Definition Format Size