Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 288)

222 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Software Configuration
6
6. Click Apply or OK to save your work.
Changes to this option take effect after an application restart.
7. Click OK on the “changes take effect after application restart” message.
Configuring the preferred IP format
To configure the preferred IP format for the Management application server to connect with
Fabric OS and Network OS devices, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Product Communication from the Software Configurations list in the Category pane.
The Product Communication pane displays ( Figure 80 ).
3. (Fabric OS and Network OS products only) Select IPv4 (default) or IPv6 to set the preferred IP
format.
4. Click Apply or OK to save your work.
Changes to this option take effect after an application restart.
5. Click OK on the “changes take effect after application restart” message.
Configuring IP communication
To configure communication between IP product and the Management application server,
complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Product Communication from the Software Configurations list in the Category pane.
The Product Communication pane displays ( Figure 81 ).
FIGURE 81 Options dialog box (Product Communication pane)