Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1634)

1588 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Provisioning flows
44
FIGURE 695 Select Switch Ports dialog box.
On the Select Switch Ports dialog box, select a port in the Available Products panel and
move it under the Selected Products panel with the right arrow.
Select OK to close the Select Switch Ports dialog box and return to the Add Flow Definition
dialog box.
- Select to swap the Ingress switch identification and Egress switch identification.
6. If a target switch is not entered for the flow definition, select the ellipses button to the right of
the Target Switch field. The Select Targets dialog box displays.
FIGURE 696 Select Targets dialog box
7. Select a switch in the Available Targets panel and move to the Selected Target panel using the
right arrow. Move switches back to the Available Targets panel using the left arrow.
8. Select OK to close the Select Targets dialog box and add the target name to the Add Flow
Definition dialog box.