Configuring an ldap server – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 559
Brocade Network Advisor SAN + IP User Manual
497
53-1002949-01
AAA Settings tab
13
10. Set the authorization preference by selecting one of the following options from the
Authorization Preference list:
•
Local Database
Use the LDAP server for authentication and the Management application local
database for authorization.
The user name in the local database must match the LDAP user name (password does
not need to match) and must have the appropriate roles and AORs. If the
Management application user name and LDAP user name do not match, create the
user and assign the respective roles and AORs (refer to
•
Primary Authentication Server
Use the LDAP server for authentication and authorization.
In the LDAP server, create new custom attributes (NmRoles & NmAors) in the AD
server and assign the appropriate Roles and AORs (refer to
AORs on the external LDAP server”
If this user already exists in the local database, the roles and AORs are overwritten
with the new roles and AORs configured in the LDAP Server.
•
LDAP Authorization
Use to assign roles and AORs to user groups and not to individual users.
When roles and AORs are assigned to a group, all AD users in the group can obtain the
roles and AORS assigned to the group. To assign roles and AORs to an AD Group, refer
“Assigning roles and AORs to an AD group”
You do not need to create users in the local database.
11. Click Apply to save the configuration.
To display the authentication audit trail, refer to
“Displaying the client authentication audit
12. Click Close to close the Server Management Console.
Configuring an LDAP server
To add or edit a LDAP server, complete the following steps.
1. Select the AAA Settings tab.
2. Select LDAP Server from the Primary Authentication list.
3. Choose one of the following options:
•
Click Add.
•
Select an existing LDAP server and click Edit.
The Add or Edit LDAP Server dialog box displays (
).