Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 700)

642 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Brocade adapters
19
HCM supports management for individual adapters (4/8/16 Gbps HBAs), 10 Gbps CNAs, 10 Gbps
or 16 Gbps Fabric Adapters, and other devices, such as the host, DCB ports, FCoE ports, and
Ethernet ports.
The Management application, in conjunction with HCM, provides end-to-end management
capability. For information about configuring, monitoring, and managing individual adapters using
the HCM GUI or the Brocade Command Utility (BCU), refer to the Adapters Administrator’s Guide.
Brocade adapters
The following sections describe the three Brocade adapter types:
• “Host Bus Adapters”
• “Converged Network Adapters”
• “Fabric Adapters”
Host Bus Adapters
Brocade offers five models of Fibre Channel Host Bus Adapters (HBAs). These models provide
reliable, high-performance host connectivity for mission-critical SAN environments. The Brocade
HBAs are listed in
Table 85 .
Using Brocade HBAs, you can connect your server (host system) to devices on the Fibre Channel
SAN. The combined high performance and proven reliability of a single-ASIC design makes these
HBAs ideal for connecting hosts to SAN fabrics based on Brocade Fabric or M-Enterprise operating
systems.
TABLE 85 Brocade Fibre Channel HBA models
Model number Description Number of ports
825 Dual-port stand-up HBA with a per-port maximum of 8 Gbps using an 8 Gbps
SFP.
1
2
815 Single-port stand-up HBA with a maximum of 8 Gbps using an 8 Gbps SFP. 1 1
804 2 Dual-port mezzanine HBA with a per-port maximum of 8 Gbps. This HBA installs
in server blades that install in
supported blade system enclosures. 2
425 Dual-port stand-up HBA with a per-port maximum of 4 Gbps using a 4 Gbps
SFP.
3
2
415 Single-port stand-up HBA with a maximum of 4 Gbps using a 4 Gbps SFP. 3 1
1 A 4 Gbps SFP installed in Brocade 815 or 825 HBAs allows 4, 2, or 1 Gbps speed only.
2 Brocade 804 mezzanine cards connect to the embedded switch modules or embedded interconnect modules on
the blade system chassis by way of an internal backplane and, therefore, no optical modules (SFP transceivers)
are involved. With the exception of no SFP transceivers, the Brocade 804 mezzanine FC HBA card functions the
same as the other Brocade HBAs.
3 An 8 Gbps SFP installed in Brocade 425 or 415 HBAs allows 4 or 2 Gbps speed only.