Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1904)

Brocade Network Advisor SAN + IP User Manual 1863
53-1002949-01
IP Wired Products report
52
IP Addresses The IP addresses of each interface, including the virtual routing interface on wired
products. For Layer 2 switches, the management IP address displays in the IP Addresses
table with "management" in the Interface column.
•
Port — The port number.
•
IP Address — The IP address.
•
Subnet Mask — The subnet mask number.
•
VRF — The virtual routing interface.
Ethernet Ports Physical port information for each port on the product. The identifier, interface name,
type, speed, physical address (displays as 0000.0000.0000 for module interfaces),
name, VLAN tag mode (tagged, untagged, dual, or blank), and duplex mode of the
physical interfaces on the product.
•
Identifier — The port identifier.
•
Port Name — The port name.
•
Type — The type of port.
•
Speed (Mbps) — The speed of the port.
•
MAC Address — The MAC address of the port.
•
Name — The name of the port.
•
Tag Mode — The tag mode of the port.
•
Duplex Mode — The duplex mode of the port.
•
MCT Client Name — The client name of the MCT switch.
•
Role — The role of the port, such as ICL or MCT.
Cluster (MCT switches
only) Cluster information for a Multi-Chassis Trunk (MCT) switch. Information includes:
•
Cluster ID — The MCT cluster ID.
•
Cluster Name — The MCT cluster name.
•
Cluster State — Whether the MCT cluster is deployed or undeployed.
•
Client Isolation Mode — Whether isolation mode is loose or strict.
•
Active Member VLAN Range — The active member VLAN for data.
•
Configured Member VLAN Range — The configured member VLAN for data.
•
Keep Alive VLAN — An alternate VLAN for Cluster Communication Protocol (CCP)
when the Inter-Chassis Link (ICL) is down.
•
Session VLAN — The VLAN used by the cluster for control operations.
•
ICL Name — The ICL name.
Cluster Peer (MCT
switches only) Cluster peer information for a Multi-Chassis Trunk (MCT) switch. Information includes:
•
Peer Product — The name and IP address of the MCT peer product.
•
Peer IP Address — The VE interface IP address of the MCT peer.
•
Peer RBridge ID — The RBridge ID of the MCT peer.
•
ICL Name — The name of the ICL used to reach the MCT peer.
•
Keep Alive Interval — The interval time for CCP over the keep-alive VLAN.
•
Hold Time — The hold-time before making the CCP down state when ICL goes down.
•
Fast Failover — Whether fast failover is enabled or disabled.
•
Active VLAN Range — The active member VLAN for data.
•
Peer State — Whether the peer state is CCP up or CCP down.
•
Peer State Up Time — How long the peer has been up.
•
Peer State Down Reason — The reason the peer is down.
Physical Ports -
Realtime The name of the device with drill-down support. When you click on the name, the “IP
Physical Ports - Realtime report” launches (refer to
“IP Physical Ports - Realtime report”
on page 1870).
GRE Tunnels Information on any GRE tunnel on the product. Information includes the following:
•
Identifier — The GRE tunnel identifier.
•
Name — The name of the GRE tunnel.
TABLE 186 Detailed Product Report fields and components (Continued)