Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1931)

1890 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
SAN main menus
A
Map Display — Select to customize a group's layout to
make it easier to view the SAN and manage its devices.
Domain ID/Port # — Select to set the display domain IDs
and port numbers in decimal or hex format.
Decimal — Select to display all domain IDs and port
numbers in decimal format.
Hex — Select to display all domain IDs in hex format.
Product Label — Select to configure which product labels
display.
Name — Select to display the product name as the
product label —
Node WWN — Select to display the node name as the
product label.
IP Address — Select to display the IP Address (IPv4 or IPv6
format) as the product label.
Domain ID — Select to display the domain ID as the
product label.
Zone Alias — Select to display the zone alias as the
product label.
Port Label — Select to configure which port labels display.
Name — Select to display the name as the port label.
Port — Select to display the port number as the port label.
Port Address — Select to display the port address as the
port label.
Port WWN — Select to display the port world wide name
as the port label.
User Port # — Select to display the user port number as
the port label.
Zone Alias — Select to display the zone alias as the port
label.
Port Display — Select to configure how ports display.
Occupied Product Ports — Select to display the ports of
the devices in the fabrics (present in the Connectivity
Map) that are connected to other devices.
UnOccupied Product Ports — Select to display the ports of
the devices (shown in the Connectivity Map) that are not
connected to any other device.
Attached Ports — Select to display the attached ports of
the target devices.
Switch to Switch Connections — Select to display the
switch-to-switch connections.
Discover Menu
Fabrics — Select to discover fabrics.
Menu Command Command Options