Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 2048)

Brocade Network Advisor SAN + IP User Manual 2009
53-1002949-01
CLI Templates
G
TABLE 50 Network OS – Create VLAN Classifier Rule
Feature Description CLI Commands
QoS This template is used to create a
protocol-based or MAC
address-based VLAN classifier rule vlan classifier rule $ $
TABLE 51 Network OS – Delete Port Profiles
Feature Description CLI Commands
AMPP Removes the port profile. no port-profile $ activate
no port-profile $
TABLE 52 Network OS – Update ACL on Port Profile
Feature Description CLI Commands
AMPP Adds a security profile to a port
profile. no port-profile $ activate
port-profile $
security-profile
mac access-group $ in
exit
port-profile $ activate
TABLE 53 Network OS – Update QoS on Port Profile
Feature Description CLI Commands
AMPP Adds a QoS profile to a port profile. no port-profile $ activate
port-profile $
qos-profile
qos cos-mutation $
exit
port-profile $ activate
TABLE 54 Network OS – Update VLAN on Port Profile
Feature Description CLI Commands
AMPP Adds a VLAN profile to a port profile. no port-profile $ activate
port-profile $
vlan-profile
switchport
switchport mode trunk
switchport trunk allowed vlan all
switchport trunk allowed vlan remove
$
switchport trunk native-vlan $
exit
port-profile $ activate