Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 375
310
Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Performance monitors
8
The Top Port CRC Errors monitor includes the following data:
•
Severity icon/monitor title — The worst severity of the data based on the error count shown
next to the monitor title.
•
Port — The port affected by this monitor.
•
Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
-
Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
-
Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
-
Target — The target port on the connected device. Click to launch the device properties
dialog box.
•
CRC Errors/sec — The number (error rate) of cyclic redundancy check (CRC) errors per second
for the duration specified in the monitor.
•
CRC Errors — The number (error count) of cyclic redundancy check (CRC) errors for the duration
specified in the monitor.
•
Product — The product affected by this monitor.
•
Type — The type of port (for example, U-Port).
•
Identifier — The port identifier.
•
Port Number — The port number.
•
State — The port state (for example, Enabled).
•
Status — The port status (for example, Up).
•
Refreshed — The time of the last update for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to
“Editing a preconfigured performance monitor”
Accessing additional data from the Top Port CRC Errors monitor
•
Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to
•
Double-click a row to navigate to the Historical Graphs/Tables dialog box. For more
information, refer to