Creating a local ca – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 957
Brocade Network Advisor SAN + IP User Manual
903
53-1002949-01
Steps for connecting to a KMIP-compliant SafeNet KeySecure
25
Creating a local CA
1. From the KeySecure Management Console, select the Security tab, then select CAs & SSL
Certificates > Local CAs.
The Certificate and CA Configuration page displays. (Refer to
Figure 325
.)
FIGURE 325
KeySecure Certificate and CA Configuration page - Create Local Certificate Authority
2. Under Create Local Certificate Authority, enter the organization information in the fields
provided, then click Create. The example is using SafeNetCA as the Local CA name.
The new Local CA is listed in the Local Certificate Authority List table. (Refer to
Figure 326
.)
FIGURE 326
KeySecure Certificate and CA Configuration page - Local Certificate Authority List
3. Verify the Local CA status is shown as Active.