Brocade Network Advisor SAN + IP User Manual v12.1.0 - Manual (Page 1403)

1354 Brocade Network Advisor SAN + IP User Manual
53-1002949-01
VLL manager
37
Deploying target actions using the VLL Manager
1. From the Deploy Target Actions pane, under the Resultant Endpoint Actions, Endpoint Targets
column, select the device, or expand the folder for the device to display the VLAN ID (if the
Tagged is configured for the port’s tag mode) and the port on which the VLL is to be assigned.
2. The Actions column displays the action to take when the VLL is deployed to the devices. An
action is displayed for the device, the VLAN, and the port to which the VLL will be deployed.
Possible actions are:
• CREATE: Adds the configuration to the device.
• DELETE: Removes the configuration from the device.
• UPDATE: Modifies the configuration on the device if the configuration is being edited.
3. Click Next.
The VLL configuration wizard Deployment Properties dialog box displays ( Figure 592 ).
FIGURE 592 VLL configuration wizard Deployment Properties