Management policy monitor, Preconfigured policy monitors, Preconfigured policy monitors 0 – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 1713
1670
Brocade Network Advisor SAN + IP User Manual
53-1002949-01
Preconfigured policy monitors
47
-
VM Manager plus Host discovery (refer to
Make sure there are Brocade HBAs (with a 2.1 or later driver) on the host.
Make sure you discover the associated fabrics.
Rule Violation Fix — If the policy monitor report shows a violation, the Administrator can add
redundant connections (either a host to attached fabrics or attached fabrics to a target LUN or
more inter-fabric routes) to establish a complete path from host to target LUN.
Management policy monitor
The management policy monitor enables you to set a policy monitor on the Management
application.
Check to see if the server backup is enabled and working — This management policy monitor
enables you to determine if backup is enabled for the Management application server and if the
backup output directory is accessible and writable.
Server backup automatically backs up the Management application database on a user-defined
schedule.
Rule Violation Fix — If the policy monitor report shows a violation, the Administrator can edit the
backup configuration through the Options dialog box, Server Backup pane (Server > Options). Refer
to
Preconfigured policy monitors
The Management application provides preconfigured policy monitors. The preconfigured policy
monitors include the following:
Default SAN Policy — Available for SAN products and contains the following values:
•
Name — Default SAN Policy
•
Description — Default policy to run on all SAN targets
•
Frequency — Weekly
•
Next Run — Next time the policy will run using the format:
example, Fri Jun 08 08:00:00 PDT 2012.
•
Last Run — Empty
•
Result — Empty
•
Rule — The default SAN policy is configured with the following rules:
-
Zoning status
-
Event registration
-
Redundant connection
-
Management application backup enabled
•
Targets — The default SAN policy is configured with the following targets:
-
Fabric Checks — All Fabrics
-
Switch/Router Checks — All SAN Switches product group