Displaying port properties – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 1264
Brocade Network Advisor SAN + IP User Manual
1213
53-1002949-01
Element Manager interface overview
31
7. Auto Rediscover check box — Select the check box to automatically refresh the Element
Manager in every five-minute intervals. Clear the check box to stop auto-rediscovery.
8. Product List Search — Use to search for a port in the port list. For detailed instructions, refer to
9. Help — Click to display the online help.
Displaying port properties
You can select any of the following views from the view list on the Element Manager toolbar to view
the port properties.
•
Port View: Select this view for a hierarchical view of the slots and trunks listing their respective
ports.
•
Table View: Select this view for a sequential list of the ports in the slot #/port # format.
•
VLAN View: Select this view for a hierarchical view of the VLANs listing their respective ports.
describes the properties of the Port View and Table View.
TABLE 124
Port View and Table View- port properties
Field/Component
Description
Identifier
The identifier of the port. Displays a chronological order of the ports in
Name
The name of the port.
MAC Address
The MAC address of the port.
Port Status
The operational status (Up or Down) of the port.
Port State
The management state (Enabled or DIsabled) of the port.
Type
The type of the port.
Speed
The speed of the port.
L2/Tag Mode
Whether the port is tagged or untagged or dual.
Untagged VLAN ID
The untagged VLAN identifier of the port.
Tagged VLAN ID
The tagged VLAN identifier of the port.
NOTE: To wrap the VLAN IDs displayed in the column, right-click the Tagged VLAN ID
column and select Wrap. By default, the VLAN IDs are not wrapped in the
column.
Duplex Mode
The duplex mode of the port.
MCT Client Name
The MCT client name.
Role
The role of the port. Possible values include the following roles:
•
MCT
•
ICL
Module
The name of the module to which the port belongs.
NOTE: This property is displayed only in Table View.