Top talkers, End-to-end monitors, Top talkers 9 end-to-end monitors 9 – Brocade Network Advisor SAN + IP User Manual v12.1.0 User Manual
Page 1665
Brocade Network Advisor SAN + IP User Manual
1619
53-1002949-01
Accessing Flow Vision from other management application features
44
For more information on accessing and using the Port Connectivity View dialog box, refer to
Top Talkers
For systems using Fabric OS version 7.2 or later, when you select a device or device port, and then
select Monitor > Performance > Top Talkers, a message displays that you can use Flow Vision to
provide Top Talkers monitoring. You have these options:
•
To use Flow Vision, delete existing monitors, then use the Add Flow Definition dialog box to
define an initiator and target port pair for monitoring. Refer to
page 1584 for more information.
•
Clicking OK opens the legacy Top Talkers dialog box. To use the legacy Top Talkers feature, you
must deactivate existing flows defined for the switch for Flow Vision.
End-to-End Monitors
For systems using Fabric OS version 7.2 or later, when you select a device or device port, and then
select Monitor > Performance > End-to-End Monitors, a message displays that you can use Flow
Vision to provide End-to-End monitoring. You have these options:
•
To use Flow Vision, delete existing monitors, then use the Add Flow Definition dialog box to
define an initiator and target port pair for monitoring. Refer to
page 1584 for more information.
•
Clicking OK, opens the legacy Set End-To-End Monitors dialog box.To use the legacy End-to-End
Monitor feature, you must deactivate existing flows defined for the switch for Flow Vision.
Target row
Source Device = * if port is on a 16-Gbps switch, otherwise empty.
Destination Device = Target port ID.
Ingress Port = Selected port's connected switch port number.
Target Switch = Selected port's connected switch.
Direction = Bidirectional
If selected row is
neither the first
or last row.
Source Device = * if port is on a 16-Gbps switch, otherwise empty.
Destination Device = * if port is on a 16-Gbps switch, otherwise empty.
Ingress Port = Selected port number.
Target Switch = Selected switch.
Direction = Bidirectional
TABLE 162
Add Flow Definition dialog box options populated per Reverse Route selection
Row Selected
Options populated