Agilent Technologies Signal Analyzer N9030a - Manual (Page 868)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Mode
If you are using the Help feature, this mode must be currently active to access its detailed
information. If it is not active, exit the Help feature (Esc key), select the mode, and re-access
Help.
Key Path Mode
Example INST:SEL CDMA1XEV
INST:NSEL 15
Initial S/W Revision Prior to A.02.00
LTE
Selects the LTE mode for general purpose measurements of signals following the LTE FDD
standard. There are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed
information. If it is not active, exit the Help feature (Esc key), select the mode, and re-access
Help.
Key Path Mode
Example INST:SEL LTE
INST:NSEL 102
Initial S/W Revision Prior to A.02.00
LTE TDD
Selects the LTE TDD mode for general purpose measurements of signals following the LTE TDD
standard. There are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed
information. If it is not active, exit the Help feature (Esc key), select the mode, and re-access
Help.
Key Path Mode
Example INST:SEL LTETDD
INST:NSEL 105
Initial S/W Revision A.03.00
868 Remote Language Compatibility Measurement Application Reference