Agilent Technologies Signal Analyzer N9030a - Manual (Page 1297)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
System
Remote Command :SYSTem:COMMunicate:LAN:SCPI:SOCKet:ENABle OFF|ON|0|1
:SYSTem:COMMunicate:LAN:SCPI:SOCKet:ENABle?
Example :SYST:COMM:LAN:SCPI:SOCK:ENAB OFF
Preset This is unaffected by a Preset but is set to ON with a “Restore System Defaults->Misc”
State Saved No
Range On | Off
Initial S/W Revision Prior to A.02.00
SICL Server
Turns the SICL server capability On or Off, enabling you to limit SCPI access over LAN through
the SICL server. (SICL IEEE 488.2 protocol.)
Parameter Description Setting
Maximum Connections The maximum number of connections that can be accessed
simultaneously 5
Instrument Name The name (same as the remote SICL address) of your analyzer inst0
Instrument Logical Unit The unique integer assigned to your analyzer when using SICL
LAN 8
Emulated GPIB Name The name (same as the remote SICL address) of the device
used when communicating with your analyzer gpib7
Emulated GPIB Logical Unit The unique integer assigned to your device when it is being
controlled using SICL LAN 8
Emulated GPIB Address The emulated GPIB address assigned to your transmitter
tester when it is a SICL server (the same as your GPIB
address) 18
Key Path System, I/O Config, SCPI LAN
Mode All
Remote Command :SYSTem:COMMunicate:LAN:SCPI:SICL:ENABle OFF|ON|0|1
:SYSTem:COMMunicate:LAN:SCPI:SICL:ENABle?
Example :SYST:COMM:LAN:SCPI:SICL:ENAB OFF
Preset This is unaffected by Preset, but is set to ON with a “Restore System Defaults->Misc”
Remote Language Compatibility Measurement Application Reference 1297