Agilent Technologies Signal Analyzer N9030a - Manual (Page 1325)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Trace/Detector
detector for each trace, but the analyzer hardware provides the maximum flexibility of detector
selection in order to maintain the highest accuracy. .The letters used for this readout are:
N=Normal
A=Average
P=peak
p=negative peak
S=Sample
Q=Quasi Peak
E=EMI Average
R=RMS Average
f=math function
If the DET letter is green it means the detector is in Auto; if it is white it means the detector has
been manually selected.
Trace Annotation
When Trace Annotation (see View/Display menu) is On, each non-blanked trace is labeled on the
trace with the detector used to take it, unless a trace math function is on for that trace, in which
case it is labeled with the math function.
The detector labels are:
NORM =Normal
PEAK =Peak
SAMP =Sample
NPEAK =Negative Peak
RMS =Average detector with Power Average (RMS)
LG AVG =Average detector with Log-Pwr Average
VAVG =Average detector with Voltage Average
QPEAK =Quasi Peak
EMI AVG =EMI Average
RMS AVG =RMS Average
The trace math labels are:
PDIF =Power Difference
PSUM =Power Sum
LOFF =Log Offset
Remote Language Compatibility Measurement Application Reference 1325