Agilent Technologies Signal Analyzer N9030a - Manual (Page 231)

5 Legacy Command Descriptions
ADJALL (LO and IF Adjustments)
ADJALL (LO and IF Adjustments)
Syntax
Legacy Products
8560 series
Description
Activates the RF local oscillator (LO) and intermediate frequency (IF) alignment routines. These
are the same routines that occur when the instrument is switched on. They are also the same
routines that are performed when you press System, Alignments, Align Now, All.
Commands following ADJALL are not executed until after the instrument has finished the
alignment routines.
Format ADJALL;
Query Data Type N/A
SCPI Equivalent Commands :CALibration[:ALL] (see "All" on page 1269 )
Remote Language Compatibility Measurement Application Reference 231