Agilent Technologies Signal Analyzer N9030a - Manual (Page 257)

5 Legacy Command Descriptions
CF (Center Frequency)
CF (Center Frequency)
Syntax
Legacy Products
8560 series, 8566A/B, 8568A/B
Description
Specifies the value of the center frequency.
The step size depends on whether the frequency has been coupled to the span width using the
command
"CS (Couple Frequency Step Size)" on page 268
l
When coupled, the step size is 10% of the span, or one major graticule division.
l
When uncoupled, the step size is determined by the command "SS (Center Frequency Step
Size)" on page 468 .
Format CF HZ|KHZ|MHZ|GHZ|KZ|MZ|GZ
Range: Frequency range of the instrument
Remote Language Compatibility Measurement Application Reference 257