Agilent Technologies Signal Analyzer N9030a - Manual (Page 64)

2 About the N9061A Measurement Application
Hardware and Firmware Requirements for N9061A
Hardware and Firmware Requirements for N9061A
For maximum compatibility, you should select an X-Series instrument that equals or exceeds the
frequency range of the legacy analyzer you are replacing. The frequency limits of the legacy
analyzers are listed below.
Remote Language Start Frequency Stop Frequency
8560E/EC 30 Hz 2.9 GHz
8561E/EC 30 Hz 6.5 GHz
8562E/EC 30 Hz 13.2 GHz
8563E/EC 9 kHz 26.5 GHz
8564E/EC 9 kHz 40.0 GHz
8565E/EC 9 kHz 50.0 GHz
HP8566A 2 GHz 22 GHz
HP8566B 2 GHz 22 GHz
HP8568A 0 Hz 1.5 GHz
HP8568B 0 Hz 1.5 GHz
Frequency Ranges of Legacy Analyzers
The following table lists the Upper Frequency Limits and minimum firmware revisions for Agilent
X-Series instruments that support N9061A.
Product Name Instrument Model Number Upper Frequency Limit Firmware Revision
PXA N9030A-503 3.6 GHz Rev A.04.00 or later
N9030A-508 8.4 GHz
N9030A-513 13.6 GHz
N9030A-526 26.5 GHz
N9030A-543 43 GHz
N9030A-544 44 GHz
N9030A-550 50 GHz
MXA N9020A-503 3.6 GHz Rev A.01.64 or later
N9020A-508 8.4 GHz
N9020A-513 13.6 GHz
N9020A-526 26.5 GHz
Compatible Agilent X-Series Instruments
64 Remote Language Compatibility Measurement Application Reference