Pp (preselector peak), Syntax, Legacy products – Agilent Technologies Signal Analyzer N9030a User Manual
Page 434: Description, Syntax legacy products
5 Legacy Command Descriptions
PP (Preselector Peak)
PP (Preselector Peak)
Syntax
Legacy Products
8560 series, 8566A/B
Description
Optimizes preselector tracking to peak the amplitude of a signal at the active marker. If a marker
is not on the screen, PP places a marker at the highest signal level, and optimizes preselector
tracking at that frequency.
Format
PP
Query Data Type
N/A
SCPI Equivalent Commands
[:SENSe]:POWer[:RF]:PCENter (see
Notes
This command is only supported when the X-series instrument’s maximum frequency
limit is greater than 3.6 GHz. If the command is sent to an instrument with a maximum
frequency limit of 3.6 GHz or less, the command is not executed, and no error is generated.
434
Remote Language Compatibility Measurement Application Reference