Agilent Technologies Signal Analyzer N9030a - Manual (Page 481)

5 Legacy Command Descriptions
TA (Trace A)
TA (Trace A)
Syntax
Legacy Products
8566A/B, 8568A/B
Description
Returns trace A amplitude values from the instrument to the controller.
Format TA?
Query Data Type The display unit values are transferred in sequential order (from left to right) as seen on
the screen.
Display unit values can be transferred to the controller in any one of the four output
formats as determined by
"O1 [one] (Format - Display Units)" on page 420 , "O2 [two]
(Format - Two 8-Bit Bytes)" on page 421 , "O3 [three] (Format - Real Amplitude Units)" on
page 422 and "O4 [four] (Format - One 8-Bit Byte)" on page 423 .
The format of the returned data is also affected by "TDF (Trace Data Format)" on page 483 ,
and if TDF B (binary data format) has been selected, by "MDS (Measurement Data Size)"
on page 374 .
SCPI Equivalent Commands :TRACe[:DATA]? TRACE(1|2|3|4|5|6)
:FORMat:[:TRACe][:DATA]
(See "Send/Query Trace Data (Remote Command Only)" on page 1387 )
Remote Language Compatibility Measurement Application Reference 481