Agilent Technologies Signal Analyzer N9030a - Manual (Page 307)

5 Legacy Command Descriptions
GP (Gate Polarity)
GP (Gate Polarity)
Syntax
Legacy Products
8560 series
Description
Sets the polarity (positive or negative) for the gate trigger.
l
If the "GATECTL (Gate Control)" on page 304 is in EDGE mode, the gate delay timer can be
triggered on either a positive or negative edge of the trigger input.
l
If the Gate Control is in LEVEL mode and POSitive is selected, the gate is on when the trigger
input is high. If the Gate Control is in LEVEL mode and NEGative is selected, the gate is on
when the trigger is low.
Format GP NEG|POS
GP?
Query Data Type NEG|POS
SCPI Equivalent Commands :SWEep:EGATe:POLarity NEG|POS (see "Gate Polarity (Remote Command Only)" on page
1236 )
Preset POS
Remote Language Compatibility Measurement Application Reference 307