Agilent Technologies Signal Analyzer N9030a - Manual (Page 1318)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
System
Remote Command :SYSTem:OPTions?
Example :SYST:OPT?
Notes The return string is a comma separated list of the installed options. For example:
“503,P03,PFR”
:SYSTem:OPTions? and *OPT? are the same.
State Saved No
Initial S/W Revision Prior to A.02.00
Lock the Front-panel keys (Remote Command Only)
Disables the instrument keyboard to prevent local input when the instrument is controlled
remotely. Annunciation showing a “K” for ‘Klock” (keyboard lock) alerts the local user that the
keyboard is locked. Klock is similar to the GPIB Local Lockout function; namely that no front-
panel keys are active with the exception of the Power Standby key. (The instrument is allowed to
be turned-off if Klock is ON.) The Klock command is used in remote control situations where Local
Lockout cannot be used.
Although primary intent of Klock is to lock-out the front panel, it will lock-out externally
connected keyboards through USB. Klock has no effect on externally connected pointing devices
(mice).
The front panel ‘Local’ key (Cancel/Esc) has no effect if Klock is ON.
Mode All
Remote Command :SYSTem:KLOCk OFF|ON|0|1
:SYSTem:KLOCk?
Example :SYST:KLOC ON
Notes Keyboard lock remains in effect until turned-off or the instrument is power-cycled
Preset Initialized to OFF at startup, unaffected by Preset
State Saved No
Initial S/W Revision Prior to A.02.00
List SCPI Commands (Remote Command Only)
Outputs a list of the valid SCPI commands for the currently selected Mode.
1318 Remote Language Compatibility Measurement Application Reference