Agilent Technologies Signal Analyzer N9030a - Manual (Page 1394)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Trigger
Meas Mode Preset for RF Preset for IQ Notes
Swept SA SA IMM IQ not
supported
CHP SA, WCDMA,
C2K, WIMAX
OFDMA, 1xEVDO,
DVB-T/H, DTMB,
LTE, LTETDD,
CMMB, ISDB-T,
Digital Cable TV,
MSR IMM IQ not
supported
OBW SA, WCDMA,
C2K, WIMAX
OFDMA, TD-
SCDMA, 1xEVDO,
LTE, LTETDD,
CMMB, ISDB-T,
MSR 1xEVDO: EXT1
others: IMM IQ not
supported For 1xEVDO mode, the trigger source is
coupled with the gate state, as well as the
gate source. When the trigger source
changes to RFBurst, External1 or External2,
the gate state is set to on, and the gate
source is set identically with the trigger
source. When the trigger source changes to
IMMediate, VIDeo, LINE, FRAMe or IF, the
gate state is set to off.
CCDF SA, WCDMA,
C2K,
WIMAXOFDMA,
TD-SCDMA,
1xEV-DO, DVB-
T/H, DTMB, LTE,
LTETDD, CMMB,
ISDB-T, Digital
Cable TV, MSR WIMAXOFDMA:
RFBurst
LTETDD:
BTS: External 1
MS: Periodic
Timer
TD-SCDMA and
1xEV-DO:
BTS: External 1
MS: RFBurst
SA, WCDMA,
C2K, LTE, CMMB,
ISDB-T, DVB-
T/H, DTMB,
Digital Cable TV,
MSR: IMMediate
TD-SCDMA
and 1xEV-DO:
BTS:
External 1
MS: IQMag
LTETDD:
BTS:
External 1
MS: Periodic
Timer
Others: IMM
For TD-SCDMA:
Trigger source is coupled with radio device.
When radio device changes to BTS, trigger
source will be changed to EXTernal1. When
radio device changes to MS, trigger source
will be set as RFBurst for RF or IQ Mag for
BBIQ.
When TriggerSource is RFBurst or IQ Mag,
Measure Interval is grayed out.
ACP SA, WCDMA,
C2K, WIMAX
OFDMA, TD-
SCDMA, 1xEVDO,
DVB-T/H, DTMB,
LTE, LTETDD, IMM IQ not
supported
1394 Remote Language Compatibility Measurement Application Reference