Agilent Technologies Signal Analyzer N9030a User Manual

Page 1376

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Trace/Detector

Dependencies

When Signal ID is on, this key is grayed out.

Preset

TRACE1, TRACE2

Backwards Compatibility
Notes

The copy and exchange operations menu in ESA and PSA is replaced with the more general
purpose Copy/Exchange menu. The remote commands are unaffected, as they were already
general.

The 2-DL->2 function in ESA and PSA (which was really a trace math function) has been
eliminated, because its use case was very rare.. It actually subtracted the dB-equivalent of the
dBm-expressed display line, regardless of the y axis unit. For example, if DL = +21.99 dBmV, it
subtracted –25.00 dB (i.e. add +25.00 dB) to trace 2. New, more useful functions are provided in
the new Trace, Math menu

Initial S/W Revision

Prior to A.02.00

Remote Command

:TRACe:EXCHange?

Example

TRAC:EXCH TRACE1, TRACE2 Exchanges Trace 1 and Trace 2 and puts both traces in
Update=Off, Display=On.

Notes

The TRACe:EXCHange command is of the form::TRACe:EXCHange

Preset

TRACE1, TRACE2

Backwards Compatibility
Notes

The copy and exchange operations menu in ESA and PSA is replaced with the more general
purpose Copy/Exchange menu. The remote commands are unaffected, as they were already
general.

Initial S/W Revision

Prior to A.02.00

From Trace

Selects the trace to be copied to or exchanged with the To Trace

Key Path

Trace/Detector, Copy/Exchange

Notes

See “Copy/Exchange”.

Preset

Initial S/W Revision

Prior to A.02.00

1376

Remote Language Compatibility Measurement Application Reference