Agilent Technologies Signal Analyzer N9030a - Manual (Page 456)

5 Legacy Command Descriptions
S1[one] (Continuous Sweep)
S1[one] (Continuous Sweep)
Syntax
Legacy Products
8566A/B, 8568A/B
Description
Sets the instrument to continuous sweep mode. In the continuous sweep mode, the instrument
takes its next sweep as soon as possible after the current sweep (as long as the trigger conditions
are met). A sweep may temporarily be interrupted by data entries made over the remote interface.
Format S1
Query Data Type N/A
SCPI Equivalent Commands :INITiate:CONTinuous 1 (see "Cont (Continuous Measurement/Sweep)" on page 563 )
Preset
Couplings
Errors
Notes The functions of S1 are identical to "CONTS (Continuous Sweep)" on page 265 .
456 Remote Language Compatibility Measurement Application Reference