Agilent Technologies Signal Analyzer N9030a - Manual (Page 284)

5 Legacy Command Descriptions
EDITDONE (Edit Done)
EDITDONE (Edit Done)
Syntax
Legacy Products
8560 series
Description
This command is used at the completion of limit-line editing, following an EDITLIML command.
You can enter the limit line data between the limit line commands beginning with "EDITLIML
(Edit Limit Line)" on page 285 and ending with EDITDONE.
Format EDITDONE
Query Data Type N/A
SCPI Equivalent Commands :CALCulate:LLINe[1]|2:DATA ,,,… (see "Limit Line Data (Remote
Command Only)" on page 823 )
Couplings "EDITLIML (Edit Limit Line)" on page 285 , "LIMIREL (Relative Limit Lines)" on page 359 ,
"LIMF (Limit Line Frequency Value)" on page 355 , "LIMU (Upper-Limit Amplitude)" on page
362 , "LIML (Lower-Limit Amplitude)" on page 360 , "LIMTSL (Slope Limit Line)" on page 361
284 Remote Language Compatibility Measurement Application Reference