Agilent Technologies Signal Analyzer N9030a - Manual (Page 251)

5 Legacy Command Descriptions
BXC (Exchange Trace B and Trace C)
BXC (Exchange Trace B and Trace C)
Syntax
Legacy Products
8566A/B, 8568A/B
Description
Exchanges Trace B data with Trace C data.
Trace C must not be an active trace. This means that the data in Trace C cannot be updated as
the instrument sweeps. To ensure that the current settings of the instrument are reflected in the
data exchanged between Trace B and Trace C, you must follow the four step process below.
1. Select single sweep mode (S2 or SNGLS command)
2. Select the desired instrument settings
3. Take one complete sweep
4. Exchange the data
Format BXC
Query Data Type N/A
SCPI Equivalent Commands TRACe3:TYPe?
TRACe3:UPDate?
TRACe3:DISPlay?
TRACe2:TYPe?
TRACe2:UPDate?
TRACe2:DISPlay?
TRACe:EXCHange TRACE2, TRACE3
(See "View/Blank " on page 1344 , etc.)
Couplings Trace Update is set to Off and Trace Display is set to On.
Notes The functions of BXC are identical to the command "KSi (Exchange Trace B and Trace C)
" on page 334 and to the XCH TRB,TRC form of the command "XCH (Exchange)" on
page 509 .
Remote Language Compatibility Measurement Application Reference 251