Agilent Technologies Signal Analyzer N9030a - Manual (Page 864)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Mode
INST:NSEL 8
Initial S/W Revision Prior to A.02.00
W-CDMA with HSPA+
Selects the W-CDMA with HSPA+ mode for general purpose measurements of signals following this
standard. There are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed
information. If it is not active, exit the Help feature (Esc key), select the mode, and re-access
Help.
Key Path Mode
Example INST:SEL WCDMA
INST:NSEL 9
Initial S/W Revision Prior to A.02.00
GSM/EDGE/EDGE Evo
Selects the GSM with EDGE mode for general purpose measurements of signals following this
standard. There are several measurements available in this mode.
If you are using the Help feature, this mode must be currently active to access its detailed
information. If it is not active, exit the Help feature (Esc key), select the mode, and re-access
Help.
Key Path Mode
Example INST:SEL EDGEGSM
INST:NSEL 13
Initial S/W Revision Prior to A.02.00
Modified at S/W
Revision A.02.00
802.16 OFDMA (WiMAX/WiBro)
Selects the OFDMA mode for general purpose measurements of WiMAX signals. There are several
measurements available in this mode.
864 Remote Language Compatibility Measurement Application Reference