Agilent Technologies Signal Analyzer N9030a - Manual (Page 1256)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
System
YELLOW: the applications you have selected can all fit into the analyzer’s memory, but there is
less than 10% of the memory left, probably not enough to load any other applications, either via
preload or by selecting a Mode while the analyzer is running..
GREEN: The indicator is green when <90% of the memory limit is consumed. This means the
applications you have selected can all fit into the analyzer’s memory with room to spare. You will
likely be able to load one or more other applications without running out of memory.
Select All
Marks all applications in the selection list. This allows you to enable all applications licensed on
the instrument for pre-loading, or is a convenience for selecting all applications in one operation
and then letting you deselect individual applications.
Key Path System, Power On, Configure Applications
Initial S/W Revision A.02.00
Deselect All
Clears the marks from all applications in the selection list, except the Power On application. The
Power On application cannot be eliminated from the pre-load list.
Key Path System, Power On, Configure Applications
Initial S/W Revision A.02.00
Move Up
The application list is the order that applications appear in the Mode Menu. This key enables
you to shift the selected application up in the list, thus moving the selected application earlier in
the Mode Menu.
Key Path System, Power On, Configure Applications
Initial S/W Revision A.02.00
Move Down
The application list is the order that applications appear in the Mode Menu. This key enables
you to shift the selected application down in the list, thus moving the selected application later in
the Mode Menu.
1256 Remote Language Compatibility Measurement Application Reference