Agilent Technologies Signal Analyzer N9030a - Manual (Page 848)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Meas Setup
De-emphasis (FM Demod only)
The De-emphasis setting controls a single-pole filter (6 dB/octave roll off), usually to counter
intentional pre-emphasis in the transmitter. When De-emphasis state is OFF the hardware digital
filter is bypassed, otherwise the setting is applied
The De-emphasis softkey is only available when FM is the demod selected. It is grayed out for AM
and PM.
Key Path Meas Setup, Analog Demod Tune & Listen, FM
Remote Command [:SENSe]:DEMod:FM:DEEMphasis OFF|US25|US50|US75|US750
[:SENSe]:DEMod:FM:DEEMphasis?
Example DEM:FM:DEEM US75
DEM:FM:DEEM?
Dependencies Only available in FM. Grayed out for AM and PM.
Preset US75 (recommended for US commercial FM 75 µs pre-emphasis)
State Saved Saved in instrument state.
Readback line 1-of-N selection
Initial S/W Revision Prior to A.02.00
De-emphasis (FM Demod only)
The De-emphasis setting controls a single-pole filter (6 dB/octave roll off), usually to counter
intentional pre-emphasis in the transmitter. When De-emphasis state is OFF the hardware digital
filter is bypassed, otherwise the setting is applied
The De-emphasis softkey is only available when FM is the demod selected. It is grayed out for AM
and PM.
Key Path Meas Setup, Analog Demod Tune & Listen, FM
Remote Command [:SENSe]:DEMod:FM:DEEMphasis OFF|US25|US50|US75|US750
[:SENSe]:DEMod:FM:DEEMphasis?
Example DEM:FM:DEEM US75
DEM:FM:DEEM?
Dependencies Only available in FM. Grayed out for AM and PM.
Preset US75 (recommended for US commercial FM 75 µs pre-emphasis)
State Saved Saved in instrument state.
Readback line 1-of-N selection
Initial S/W Revision Prior to A.02.00
848 Remote Language Compatibility Measurement Application Reference