Agilent Technologies Signal Analyzer N9030a - Manual (Page 1370)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Trace/Detector
Notes See Trace “Math”.
State Saved The current trace math function is saved in Instrument State
Readback Off
Initial S/W Revision Prior to A.02.00
Trace Operands
Selects the trace operand(s) to be used for the trace math functions for the destination trace.
Key Path Trace/Detector, Math
Notes The operands of the trace math commands specify the trace operands. Since the operands are
common to all math functions for a given trace, the most recently sent math function command
sets the operands for each trace and are reflected on the trace operand keys.
Dependencies The destination trace cannot be an operand.
Readback line In square brackets, the First Trace operand, new line, and the second trace operand, as:
[Op1=Trace 1,
Op2=Trace2]
where Trace 1 is operand 1 and Trace 2 is operand 2.
Initial S/W Revision Prior to A.02.00
Operand 1
Selects the first trace operand to be used for the trace math functions for the destination trace.
Key Path Trace/Detector, Math, Trace Operands
Dependencies The First Trace cannot be the same as the destination trace. The destination trace number is
gray on the key, and the underline skips that number when selecting the trace.
Preset Trace number – 2 (wraps at 1). For example, for Trace 1, the First Trace presets to Trace 5; for
Trace 6, it presets to Trace 4.
State Saved The First Trace operand for each trace is stored in instrument state.
Readback Trace
Initial S/W Revision Prior to A.02.00
Operand 1
Selects the first trace operand to be used for the trace math functions for the destination trace.
1370 Remote Language Compatibility Measurement Application Reference