Agilent Technologies Signal Analyzer N9030a - Manual (Page 1371)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Trace/Detector
Key Path Trace/Detector, Math, Trace Operands
Dependencies The First Trace cannot be the same as the destination trace. The destination trace number is
gray on the key, and the underline skips that number when selecting the trace.
Preset Trace number – 2 (wraps at 1). For example, for Trace 1, the First Trace presets to Trace 5; for
Trace 6, it presets to Trace 4.
State Saved The First Trace operand for each trace is stored in instrument state.
Readback Trace
Initial S/W Revision Prior to A.02.00
Operand 1
Selects the first trace operand to be used for the trace math functions for the destination trace.
Key Path Trace/Detector, Math, Trace Operands
Dependencies The First Trace cannot be the same as the destination trace. The destination trace number is
gray on the key, and the underline skips that number when selecting the trace.
Preset Trace number – 2 (wraps at 1). For example, for Trace 1, the First Trace presets to Trace 5; for
Trace 6, it presets to Trace 4.
State Saved The First Trace operand for each trace is stored in instrument state.
Readback Trace
Initial S/W Revision Prior to A.02.00
Operand 1
Selects the first trace operand to be used for the trace math functions for the destination trace.
Key Path Trace/Detector, Math, Trace Operands
Dependencies The First Trace cannot be the same as the destination trace. The destination trace number is
gray on the key, and the underline skips that number when selecting the trace.
Preset Trace number – 2 (wraps at 1). For example, for Trace 1, the First Trace presets to Trace 5; for
Trace 6, it presets to Trace 4.
State Saved The First Trace operand for each trace is stored in instrument state.
Readback Trace
Initial S/W Revision Prior to A.02.00
Remote Language Compatibility Measurement Application Reference 1371