Agilent Technologies Signal Analyzer N9030a - Manual (Page 866)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Mode
Phase Noise
The Phase Noise mode provides pre-configured measurements for making general purpose
measurements of device phase noise.
If you are using the Help feature, this mode must be currently active to access its detailed
information. If it is not active, exit the Help feature (Esc key), select the mode, and re-access
Help.
Key Path Mode
Example INST:SEL PNOISE
or
INST:NSEL 14
Initial S/W Revision Prior to A.02.00
Noise Figure
The Noise Figure mode provides pre-configured measurements for making general purpose
measurements of device noise figure.
If you are using the Help feature, this mode must be currently active to access its detailed
information. If it is not active, exit the Help feature (Esc key), select the mode, and re-access
Help.
Key Path Mode
Example INST:SEL NFIGURE
INST:NSEL 219
Initial S/W Revision Prior to A.02.00
Analog Demod
Selects the Analog Demod mode for making measurements of AM, FM and phase modulated
signals.
If you are using the Help feature, this mode must be currently active to access its detailed
information. If it is not active, exit the Help feature (Esc key), select the mode, and re-access
Help.
Key Path Mode
866 Remote Language Compatibility Measurement Application Reference