Agilent Technologies Signal Analyzer N9030a - Manual (Page 194)

4 List of Legacy Analyzer Commands
Alphanumeric List of all Legacy Commands with N9061A Support
Command Description 8566 8568
8560
Series Description
MKMIN Moves active marker to
minimum signal detected Yes Yes Yes "MKMIN (Marker Minimum)" on page 392
MKN Normal marker Yes Yes Yes "MKN (Marker Normal)" on page 393
MKNOISE Marker noise function Yes Yes Yes "MKNOISE (Marker Noise)" on page 395
MKOFF Turns all markers or the
active marker off Yes Yes Yes "MKOFF (Marker Off)" on page 396
MKP Specifies the horizontal
position of the marker Yes Yes N/A "MKP (Marker Position)" on page 397
MKPAUSE Pauses the sweep at the
active marker No No N/A
MKPK Marker peak Yes Yes Yes "MKPK (Marker Peak)" on page 398
MKPT Marker peak threshold N/A N/A Yes "MKPT (Marker Threshold)" on page 400
MKPX Marker peak excursion Yes Yes Yes "MKPX (Marker Peak Excursion)" on page 401
MKREAD Specifies marker readout
mode Yes Yes N/A "MKREAD (Marker Readout)" on page 402
MKRL Moves the active marker to
reference level Yes Yes Yes "MKRL (Marker to Reference Level)" on page
404
MKSP Marker span Yes Yes Yes "MKSP (Marker Span)" on page 405
MKSS Marker step size Yes Yes Yes "MKSS (Marker to Step Size)" on page 406
MKSTOP Stops the sweep at the
active marker No No N/A
MKT Position marker in units of
time N/A N/A Yes "MKT (Marker Time)" on page 407
MKTBL Marker table N/A N/A N/A
MKTRACE Marker trace Yes Yes N/A "MKTRACE (Marker Trace)" on page 408
MKTRACK Turns the marker signal
track on or off Yes Yes Yes "MKTRACK (Marker Track)" on page 409
MKTYPE Specifies the type of active
marker to be used Yes Yes N/A "MKTYPE (Marker Type)" on page 410
ML Mixer Level Yes Yes Yes "ML (Mixer Level)" on page 411
MOD Modulo No No No
MODRCLT Recalls trace from module
memory N/A N/A No
MODSAVT Saves trace in module N/A N/A No
194 Remote Language Compatibility Measurement Application Reference