Agilent Technologies Signal Analyzer N9030a - Manual (Page 567)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
File
Parameter Name Print Themes
Parameter Type Enum
Mode All
Remote Command :SYSTem:PRINt:THEMe TDColor|TDMonochrome|FCOLor|FMONochrome
:SYSTem:PRINt:THEMe?
Example :SYST:PRIN:THEM FCOL
Setup : SYSTem:DEFault MISC
Preset FCOL; not part of Preset, but is reset by Restore Misc Defaults or Restore System Defaults All
and survives subsequent running of the modes.
State Saved No
Initial S/W Revision Prior to A.02.00
Print
This front-panel key is equivalent to performing a File, Print, OK. It immediately performs the
currently configured Print to the Default printer.
The :HCOPy command is equivalent to pressing the PRINT key. The HCOPy:ABORt command can
be used to abort a print which is already in progress. Sending HCOPy:ABORt will cause the
analyzer to stop sending data to the printer, although the printer may continue or even complete
the print, depending on how much data was sent to the printer before the user sent the ABORt
command.
Key Path Front-panel key
Remote Command :HCOPy[:IMMediate]
Initial S/W Revision Prior to A.02.00
Key Path SCPI command only
Remote Command :HCOPy:ABORt
Initial S/W Revision Prior to A.02.00
Remote Language Compatibility Measurement Application Reference 567