Agilent Technologies Signal Analyzer N9030a - Manual (Page 635)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Input/Output
If we interpolate on a linear scale, we assume that the two points are connected by a straight line
on the linear scale, as below:
The correction to be used for each bucket is taken from the interpolated correction curve at the
center of the bucket.
Description
Sets an ASCII description field which will be stored in an exported file. Can be displayed in the
active function area by selecting as the active function, if desired to appear in a screen capture.
Key Path Input/Output, Corrections, Properties
Remote Command [:SENSe]:CORRection:CSET[1]|2|...6:DESCription "text"
[:SENSe]:CORRection:CSET[1]|2|...6:DESCription?
Example :CORR:CSET1:DESC "11941A Antenna correction"
Notes 45 chars max; may not fit on display if max chars used
Preset Unaffected by a Preset. Set to empty by Restore Input/Output Defaults
State Saved Saved in instrument state.
Initial S/W Revision A.02.00
Comment
Sets an ASCII comment field which will be stored in an exported file. Can be displayed in the
active function area by selecting as the active function, if desired to appear in a screen capture.
Key Path Input/Output, Corrections, Properties
Remote Command [:SENSe]:CORRection:CSET[1]|2|...6:COMMent "text"
[:SENSe]:CORRection:CSET[1]|2|...6:COMMent?
Remote Language Compatibility Measurement Application Reference 635