Agilent Technologies Signal Analyzer N9030a - Manual (Page 158)

3 Programming the Analyzer
STATus Subsystem
5) in the Questionable Register. The variable is the sum of the decimal values of the bits
you want to enable.
Mode All
Remote
Command :STATus:QUEStionable:FREQuency:ENABle
:STATus:QUEStionable:FREQuency:ENABle?
Example STAT:QUES:FREQ:ENAB 2
Frequency Reference Unlocked will be reported to the Frequency Summary of the Status Questionable
register.
Preset 32767
Min 0
Max 32767
Status
Bits/OPC
dependencies Sequential command
Initial S/W
Revision Prior to A.02.00
Questionable Frequency Event Query
This query returns the decimal value of the sum of the bits in the Questionable Frequency Event
register.
The register requires that the associated PTR or NTR filters be set before a condition register bit can set a
bit in the event register. The data in this register is latched until it is queried. Once queried, the register is
cleared.
Mode All
Remote Command :STATus:QUEStionable:FREQuency[:EVENt]?
Example STAT:QUES:FREQ?
Preset 0
Status Bits/OPC dependencies Sequential command
Initial S/W Revision Prior to A.02.00
Questionable Frequency Negative Transition
This command determines which bits in the Questionable Frequency Condition register will set
the corresponding bit in the Questionable Frequency Event register when the condition register bit
158 Remote Language Compatibility Measurement Application Reference