Agilent Technologies Signal Analyzer N9030a - Manual (Page 232)

5 Legacy Command Descriptions
AMB (A minus B into A)
AMB (A minus B into A)
Syntax
Legacy Products
8560 series, 8566A/B, 8568A/B
Description
Subtracts the points in Trace B from the corresponding points in Trace A, and sends the results
to Trace A. Thus, AMB can restore the original trace after an
"APB (Trace A Plus Trace B to A)" on
page 235 or a "KSc (A Plus B to A)" on page 325 command has been executed.
The query AMB? returns different responses depending on the language being used. The 8560
Series languages return either a 1 or a 0 to indicate the On or Off status.The 8566, 8568 Series
languages all return either ON or OFF.
Format AMB 0|1|OFF|ON
AMB?
Query Data Type 1 or 0, indicating ON or OFF state respectively.
SCPI Equivalent Commands None
Preset OFF
Couplings Sets Trace B to View mode and turns "AMBPL (A minus B plus Display Line into A)" on
page 233 (Normalize) OFF. All trace math is mutually exclusive, so turning one on turns the
other off and vice versa. Similarly, when AMB is on and you change Trace B to Clearwrite
or Maxhold, it turns AMB off.
Notes The functions of the command AMB are identical to the command "C2 [two] (A Minus B
Into A)" on page 253 .
232 Remote Language Compatibility Measurement Application Reference