Agilent Technologies Signal Analyzer N9030a User Manual

Page 765

6 RLC Swept SA Measurement Front-Panel & SCPI Reference

Marker Function

as a parameter, sets detector 2 to Quasi Peak. If sent with Off as a parameter, sets detector 2 to
Off

Initial S/W Revision

A.02.00

Detector 2

This menu lets you select the detector to be used for Detector 2, or turn Detector 2 off. This is a
1-of-N menu that shows the normal list of detectors, but with the “Auto” key replaced by “Off”.

Key Path

Marker Function, Measure at Marker, Detectors

Remote Command

See

"Detectors" on page 755

Example

:CALC:MAM:DET2 QPE

Sets the detector for measure at marker detector 2 to Quasi peak

:CALC:MAM:DET2 OFF

Sets the detector for measure at marker detector 2 to Off

Preset

Quasi Peak

State Saved

Saved in instrument state

Readback Text

Detector name

Backwards
Compatibility SCPI

[:SENSe]:EMI:MEASure:DETector:QPEak[:STATe] OFF|ON|0|1|

This command is included for compatibility with the E7400 and PSA option 239 . If sent with On
as a parameter, sets detector 2 to Quasi Peak. If sent with Off as a parameter, sets detector 2 to
Off