Agilent Technologies Signal Analyzer N9030a - Manual (Page 1391)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Trace/Detector
Mean Trace Data (Remote Command Only)
Included for ESA compatibility. Not recommended for new designs. Use the CALCulate:DATA:COMPress
command instead.
Returns the mean of the amplitudes of the trace amplitude elements in measurement units.
Remote Command :TRACe:MATH:MEAN? TRACE1|TRACE2|TRACE3|TRACE4|TRACE5|TRACE6
Example TRAC:MATH:MEAN? TRACE2
Initial S/W Revision Prior to A.02.00
Display Trace Time Query (Remote Command Only)
Can be used to determine the time that the current trace in the spectrogram started.
Remote Command :TRACe:DISPlay:VIEW:SPECtrogram:TIME?
Example :TRAC:DISP:VIEW:SPEC:TIME?
Returns the start time of the Display Trace relative to the start time of the “live” trace
(Spectrogram Trace 1)
Dependencies Only available in the Spectrogram View of the Swept SA measurement. If the command is sent
in any other View, an error is generated.
Initial S/W Revision A.07.01
Remote Language Compatibility Measurement Application Reference 1391