Agilent Technologies Signal Analyzer N9030a - Manual (Page 1374)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Trace/Detector
Readback Trace
Initial S/W Revision Prior to A.02.00
Operand 2
Selects the second trace operand to be used for the trace math functions for the destination trace.
Key Path Trace/Detector, Math, Trace Operands
Dependencies The Second Trace cannot be the same as the destination trace. The destination trace number is
gray on the key, and the underline skips that number when selecting the trace.
Preset Trace number – 1 (wraps at 1). For example, for Trace 1, the Second Trace presets to Trace 6; for
Trace 6, it presets to Trace 5.
State Saved The Second Trace operand for each trace is stored in instrument state
Readback Trace
Initial S/W Revision Prior to A.02.00
Operand 2
Selects the second trace operand to be used for the trace math functions for the destination trace.
Key Path Trace/Detector, Math, Trace Operands
Dependencies The Second Trace cannot be the same as the destination trace. The destination trace number is
gray on the key, and the underline skips that number when selecting the trace.
Preset Trace number – 1 (wraps at 1). For example, for Trace 1, the Second Trace presets to Trace 6; for
Trace 6, it presets to Trace 5.
State Saved The Second Trace operand for each trace is stored in instrument state
Readback Trace
Initial S/W Revision Prior to A.02.00
Operand 2
Selects the second trace operand to be used for the trace math functions for the destination trace.
Key Path Trace/Detector, Math, Trace Operands
Dependencies The Second Trace cannot be the same as the destination trace. The destination trace number is
gray on the key, and the underline skips that number when selecting the trace.
1374 Remote Language Compatibility Measurement Application Reference